The Components Of Your Blood Pressure Monitor; Inserting The Batteries - Microlife BP3AX1-4U Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.
Components of your blood pressure monitor
The illustration below shows your blood pressure monitors key features:
Display
Battery Cover
ON/OFF/START
Button
This wrist cuff fits wrist circumference of 5.3" to 7.67" (13.5cm to 19.5 cm).
4.
Using the blood pressure monitor

4.1. Inserting the batteries

After you have unpacked your device, insert the
batteries.
1.
Remove the cover as illustrated (A).
2.
Lay the clear plastic strip (B) inside the battery
compartment, and insert 2 x size AAA 1.5V
batteries (C), observing the indicated polarity
according to the markings on the cuff (D).
Caution!
After the low battery warning appears, the device
is disabled until the batteries have been replaced.
If the battery warning appears in the display, the
batteries are discharged and must be replaced by
new ones.
Use AAA Long-Life or Alkaline 1.5V Batteries. The
use of rechargeable batteries is not recommended.
If the blood pressure monitor is left unused for long
periods, remove the batteries from the device.
6
Scroll Buttons
M = OK/Mode Button
Cuff
A
B
C
D

Publicidad

Tabla de contenido
loading

Tabla de contenido