Atlantis A11-NVR1600 Guia De Inicio Rapido página 28

 Always wear safety helmet or hard head and safety shoes before work.
 Always keep the equipments in dry places.
 Always wear safety harnesses/belt while you work in high places.
 Always wear dry clothing and avoid moisture and water.
 Always wear Public Safety Vest , while you work at night.
 Make sure all electrical connections are tight, clean, and dry.
 Make sure that you are well insulated and eliminate the electric static charge.
 Always wear dry gloves, rubber-soled shoes, or stand on a dry board or platform.
 Always Follow recognized safety standards.
 Always wear correct eye, ear, and body protection.
 Always have second person on-site, while you work in the darkness places, poor ventilation places and high
places.
 Make sure that you are well protected against arc flashes, mechanical injury, or other mishaps.
 Make sure that the polarity of wire is correct, before installing equipments.
 Always handle equipment with care.
 Do Not block the ventilation of equipment.
 Do Not put the magnetic parts around the Equipment.
 Do Not put the objects on top of equipment.
 For internal use.
 Do not use the product if the cable is damaged.
 Bring at a qualified repair center.
 It is not a toy.
 Keep out of reach of children.
 The device should not be used by people with reduced physical problems, sensory or mental abilities or lack
of experience and knowledge, unless they have been given supervision or instruction concerning the use
by a person responsible.
 AC/DC Adapter used with A11-NVR1604P [Input: 100-240VAC, 50/60Hz, 1.5A Max /Output: 48VDC, 1.2A,
57,6W Max
 AC/DC Adapter used with A11-NVR1608P and A11-NVR1608P-4K [Input: 100-240VAC, 50/60Hz, 2.5A Max
/Output: 48VDC, 3.0A, 144W Max
 AC/DC Adapter used with A11-NVR1600 and A11-NVR1600-4K [Input: 100-240VAC, 50/60Hz, 1.5A Max
/Output: 12VDC, 4.0A, 48W Max
Important information for the correct recycle/treatment procedures of this equipment
This product may contain substances that can be hazardous to the environment or to human health if it is not
disposed of properly. We therefore provide you with the following information to prevent releases of these
substances and to improve the use of natural resources. Electrical and electronic equipments should never be
disposed of in the usual municipal waste but must be separately collected for their proper treatment. The
crossed-out bin symbol, placed on the product and in this page, remind you of the need to dispose of properly
the product at the end of its life. In this way it is possible to prevent that a not specific treatment of the
substances contained in these products, or their improper use, or improper use of their parts may be
hazardous to the environment or to human health. Furthermore this helps to recover, recycle and reuse many
of the materials used in these products. For this purpose the electrical and electronic equipment producers
and distributors set up proper collection and treatment systems for these products. At the end of life your
product contact your distributor to have information on the collection arrangements. When you purchase this
product, your retailer will also tell you about the free of charge option of returning another appliance that has
reached the end of its useful life on condition that it is of the same type and performed the same role as the
appliance purchased. If smaller than 25 cm, AEE can be returned without the obligation of purchasing a similar
product.A disposal of the product different from what described above will be liable to the penalties prescribed
]
]
]
28
ENG