Nvr Cabling - Atlantis A11-NVR1600 Guia De Inicio Rapido

1.4 NVR CABLING

 Connect a VGA/HDMI cord (not included) from your monitor to the VGA/HDMI output on the rear panel of
your NVR (or use RCA Output).
 Connect the USB mouse to the USB slot for mouse on the rear panel of the NVR.
 Connect one end of the network cable (not included) to RJ-45 port on the rear panel of the NVR.
 Connect another end of the network cable to your router, modem or other network connection device.

Plug in both of the Camera & NVR power supply to an open outlet.
In the following diagrams some examples: A11-NVR1600, A11-NVR1608P and A11-NVR1608P-4K.
32
ENG