epic power ERS 2G Manual De Instalación página 24

ERS 2G
Part description
1
2
3
4
Power connection to the motor drive, P(+), GND, NC, N(-)
Cooling openings of the ERS 2G's fan.
ON/OFF switch
LED strip which will indicate by using lights combinations of the 8 LEDs
different states:
First connection (set up): When you perform first connection a
•
single LED will light and will move from left to right. This process
will last 30 seconds approximately. During this period of time the
ERS 2G is preparing to work and is not in operation.
Normal operation:
•
Ultracapacitors charge: LED strip indicates the amount of energy
o
stored, being the number of ON lights proportional to the energy
storage.
Stand-by state: While the ERS system is the elevator is not
o
travelling, the ERS system is providing the stand-by energy of the
drive. In this situation, the LEDS showing the current state-of-
charge blink.
Error indication: The ERS 2G can indicate different types of
•
anomalies through different LED lights combinations:
Instalation guide
DO NOT COVER!
ERROR 1
ERROR 2
ERROR 3
ERROR 4
ERROR 5
ERROR 6
ERROR 7
ERROR 8
Adjustment mode
24