5/ Precautions - epic power ERS 2G Manual De Instalación

ERS 2G

5/ PRECAUTIONS

ATTENTION
ATTENTION
ATTENTION
ATTENTION
ATTENTION
The ERS 2G DOES NOT REPLACE any system or device
that is required for the conventional operation of the lift.
This is particularly valid for the braking resistor, which
must NEVER be REMOVED.
The ERS 2G is NOT CONNECTED in parallel to the braking
resistor.
Make sure to follow exactly the installation and
maintenance procedures. Otherwise overvoltage and/or
overcurrent can happen,
equipment and/or can lead to injuries to humans.
The connection between the frequency inverter and the
ERS can reach high voltage levels up to 800VDC, which
can cause the dead of human beings.
In the case of failure or any further question related to
the operation of the ERS please contact EPIC-Power at
support@epicpower.es. DO NOT REMOVE THE COVER OF
THE ERS, it is a complex power electronics device that
must be handled only by qualified personnel. Inadequate
ERS manipulation could damage the ERS or could cause a
serious accident.
Instalation guide
which can damage the
33