Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ERS 2G
ATTENTION
ATTENTION
ATTENTION
ATTENTION
Instalation guide
IT IS MANDATORY to connect the ground wire
(minimum section of 1.5 mm
improving the overall safety, it provides
EMC/EMI protection. If it is not connected,
malfunction of the ERS can occur and the
device can be damaged.
In case of loss of the ground connection the
ERS will keep working, but its mechanical
enclosure will not be grounded and will not
share the same voltage of the ground of the
installation.
BE SURE to SWITCH OFF and DISCONNECT the
frequency inverter from the three-phase
mains before any manipulation is made.
Otherwise there is a high risk of damages and
injuries that can lead the operator to death.
The effort of holding the wires mustn't rely on
the terminals. It Is recommended the use of
fixing ties.
The equipment has been designed for Type B
weather
conditions
contamination:
In
case
concur, consult the producer (epic power).
2
). Apart from
and
Grade
2
other
conditions
30
Publicidad
Tabla de contenido
