epic power ERS 2G Manual De Instalación página 32

ERS 2G
ATTENTION
ATTENTION
ATTENTION
ATENCIÓN
Instalation guide
Although the three-phase line has been
disconnected and the frequency inverter is
switched off, the ERS MAY STILL BE
ENERGIZING THE FREQUENCY INVERTER.
So before MANIPULATING the FREQUENCY
INVERTER DO MAKE sure that the ERS is
SWITCHED-OFF
With the material that is provided with ERS,
the required safety isolation is guaranteed.
In case of replacing a wire, use an equivalent
one.
In case of replacement of the hose terminals
at the drive side, these must have a terminal
ending, to prevent loose threads. This is how
the hose provided with the system is
terminated.
To meet UNE-EN 12015:2005 and UNE-EN
12016:2014 standards the provided ferrite
must be installed on control cables next to
ERS 2G signal connector (5).
32