en
18 | TPA 200 | Symbols used
1.
Symbols used
1.1
In the documentation
1.1.1
Warning notices -
Structure and meaning
Warning notices warn of dangers to the user or
people in the vicinity. Warning notices also indi-
cate the consequences of the hazard as well as
preventive action. Warning notices have the follow-
ing structure:
Warning
KEY WORD – Nature and source of
symbol
hazard!
Consequences of hazard in the event
of failure to observe action and infor-
mation given.
¶
Hazard prevention action and
information.
The key word indicates the likelihood of occur-
rence and the severity of the hazard in the event of
non-observance:
Key word
Probability of
occurrence
DANGER
Immediate impend-
ing danger
WARNING Possible impend-
ing danger
CAUTION
Possible dangerous
situation
1.1.2
Symbols in this documentation
Symbol Designation
Explanation
Attention
Warns about possible proper-
!
ty damage.
Information
Practical hints and other
i
useful information.
1.
Multi-step
Instruction consisting of sev-
2.
operation
eral steps.
One-step
Instruction consisting of one
e
operation
step.
Intermediate
An instruction produces a visi-
result
ble intermediate result.
Final result
There is a visible final result
"
on completion of the instruc-
tion.
|
1 689 989 200
2014-05-08
Severity of danger
if instructions not
observed
Death or severe in-
jury
Death or severe in-
jury
Minor injury
1.2
On the product
!
Observe all warning notices on products and
ensure they remain legible.
Protect the storage battery of the TPA
200 against heat, e.g. against constant
exposure to sunlight. The TPA 200
max.50 °C
must not be exposed to temperatures
exceeding 45 °C.
2.
User instructions
These operating instructions describe the func-
tions of the TPA 200 and contain step-by-step
directions for use of the TPA 200. Study and ob-
serve these operating instructions in full before
using the TPA 200. It is also essential to heed all
the vehicle manufacturer's safety instructions
and information.
2.1
Terms of warranty
The warranty is expressly restricted to the initial
purchasers of Bosch electronic diagnostic devices
(referred to in the following as units). A 2-year
(24-month) warranty against material and manufac-
turing defects applies to Bosch units as from the
date of delivery. This warranty does not apply to
any units used incorrectly, modified or employed
for a purpose for which they are not intended, or
used in a way which deviates from that described
in the usage instructions. The sole course of action
in the event of a faulty unit is repair or replacement
by Bosch. Under no circumstances is Bosch liable
for direct, indirect, special and exemplary damages
or consequential damages (including lost profits),
whether this is based on warranty, contract, tort or
any other legal theory.
2.2
Exemption from liability
The above warranty supersedes all other guar-
antees made explicitly or implicitly, including
guarantees of marketability or suitability for a
particular area of application.
2.3
Data and software
The system software is protected by copyright.
Users have no rights or claims to the system
software other than a restricted right of use
which can be revoked by Bosch. The system
software must not be passed on or disclosed
without the written consent of Bosch. Copying
of the system software is not permissible.
Robert Bosch GmbH