en
20 | TPA 200 | Product Description
3.4
Scope of delivery
Designation
TPA 200
USB connecting cable
CD with TPA Startcenter software
Original operating instructions
3.5
Product description
3.5.1
TPA 200
Abb. 1:
TPA 200
1 LCD display
2 USB port (mini USB)
3 Selection keys
4 Function key
i
The charging contacts on the back of the unit
are intended for a charging station (special ac-
cessory, currently not yet available).
|
1 689 989 200
2014-05-08
Order number
–
1 684 465 683
1 687 005 103
1 689 989 200
1
2
3
4
3.5.2
Function of the keys
Key
Function
R Selection key for operating selection lists
(when the selection key is held pressed,
it causes the selection list to run quickly).
R Selection of numbers or letters (e.g.
when the order number or license num-
ber is entered)
R On/Off key
R Function key for menu selection
R During vehicle identification you can re-
turn again to the main menu, if the func-
tion key is held pressed.
R Selection key for operating selection lists
(when the selection key is held pressed,
it causes the selection list to run quickly).
R Selection of numbers or letters (e.g.
when the order number or license num-
ber is entered)
3.6
On/Off key
3.6.1
Switching on
¶
Press
.
The software version is shown in the dis-
play.
The main menu appears.
"
The TPA 200 is ready for operation.
3.6.2
Switching off
1. Select " Disabled" with
with
.
Goodbye
is displayed.
"
The TPA 200 is switched off.
i
The TPA 200 switches itself off automatically
after five minutes if not used. The TPA 200
can be switched off in any menu by pressing
the On/Off key for approx. 4 seconds.
3.7
Charging the internal storage
battery
The internal storage battery of the TPA 200
is charged from a PC/laptop via the supplied
USB connecting cable. If the storage battery is
fully run down, the charging time is approx. 2.5
hours. The TPA 200 cannot be operated during
charging.
i
Alternatively power supply units (over 500
mA) with a plug and USB port can be used
for charging the storage battery.
or
and confirm
Robert Bosch GmbH