Alpha IP RTD 61001-N1 Manual De Instrucciones página 45

"Pr.nr" for the selection of the week profile number ("no. 1, no. 2 ... no. 6").
1. Select the number of the desired profile and confirm the selection by shortly
pressing the setting wheel.
"Pr.Ad" for the individual setting of the week profiles („no. 1, no. 2 ... no. 6"). Up
to 6 heating phases (13 switch-over points) can be set in the week profile for every
week day for the selected heating profile. Programming is made for the selected
days for the time from 00:00 to 23:59 o'clock.
1. In the menu item "Pr.Ad", select the number of the desired profile by turning
the setting wheel (E) and confirm the selection by shortly pressing the wheel.
2. Select the desired week day/working day/weekend/all days by turning the set-
ting wheel (E) and confirm the selection by shortly pressing the wheel.
3. Confirm the start time of 00:00 o'clock by shortly pressing the setting wheel (E).
4. Select the desired temperature for the starting time by turning/pressing and con-
firm.
5. Select and confirm the time indicated in the display by turning/pressing the set-
ting wheel.
6. Select the desired temperature for the set period by turning/pressing and con-
firm.
7. Repeat the process for the complete period from 00:00 to 23:59 o'clock."OSSF"
serves for activating ("On") or deactivating ("OFF") the Smart Start/Stop func-
tion. Once this function is activated, the system calculates in a self-teaching way
when it must start the heating/cooling process in order to provide the stored
temperature exactly at the defined heating times.
Operating modes and configuration
45