Description Of The Components - HPC 11500 Manual De Instrucciones

Instruction Manual Pressing Tool
11500
2. Warranty
If the tool is operated according to its intended use and the regular maintenance services are observed our war-
ranty is 24 months from the time of delivery. Worn-out parts resulting from regular use are excluded. We reserve
the right to rework the tool in case of a valid warranty claim.
3. Description of the battery operated electro-hydraulic pressing tool

3.1 Description of the components

The hydraulic tool is a hand operated tool and consists of the following components:
Table 2 (see page I, pic.1)
Pos. Description
1 Pressing head
2 Retract slide
3 LED (red)
4 Battery lock
5 Battery
6 LED (white)
7 Trigger
8 Jaws
9 Locking pin
L611500 Rev. C © 05/2013
Function
Working unit to accommodate the pressing jaws
Slide to open the pressing jaws in case of an error or emergency
Indicator for battery charge, service Intervals and faults
Slide to unlock the battery
Rechargeable Li-Ion battery 18V
to illuminate the working area
Actuator to start the pressing cycle
Pressing jaws
Pin with special lock to open/close the pressing head
2
US