HPC 11500 Manual De Instrucciones página 13

Instruction Manual Pressing Tool
11500
Li-Ion batteries have neither a memory eff ect nor self-discharge. Even after long periods of non-operation the tool
is always ready to operate. In addition, they have a lower power weight ratio with 50% more capacity and shorter
charging cycles compared to NiMH batteries.
The oil used in our tool is rapidly bio-degradable and non-hazardous to water, and has been received
Angel" ecolabel. The oil is suitable for low temperatures and has excellent lubrication characteristics.
At the end of a job a print-out via a USB adapter (not included) can be generated documenting the proper function
of the tool.
3.3 Visual and Audio Indicator Meanings
See page VIII, tab. 1
4. Operating Instructions
4.1 Operation of the tool
The pressing cycle is started by squeezing the trigger (page 1, pic. 1.7). The pressing cycle is characterized by the closing
motion of the jaws. Due to the linear movement of the rollers on the piston the jaws close scissors like.
Attention
The pressing cycle must be completed and the jaws closed to ensure a permanent leak free connection.
Attention
The pressing process can be interrupted at any moment by releasing the trigger.
Attention
This tool is intended for use with HeatLink
Attention
The user has to check by visual means whether the pressing jaws are completely closed.
Attention
If a pressing cycle has been interrupted the fi tting has to be either replaced or pressed a second time.
Attention
Do not operate the tool without jaws.
L611500 Rev. C © 05/2013
® PEX tubing, fi ttings, and stainless steel press sleeves.
"The Blue
4
US