Panasonic AW-HE870E Manual Del Operador página 26

System configuration (Connections)
wConnection of the Indoor Pan-tilt Head AW-PH360
p Turn off the power of all the equipment before proceeding with the connections.
p Connect the AC adapter (AW-PS300A) to the AW-PH360 indoor pan-tilt head.
p Use 10BASE-T straight cables to connect the RP connectors on the pan-tilt heads with the CONTROL OUT TO PAN/TILT
HEAD (1 to 5) connectors on the AW-RP655 multi-function controller and AW-RP555 multi hybrid control panel.
The maximum extension distance is 1000 m when using UTP category 5 cables or their equivalent.
p Connect the CONTROL OUT TO PAN/TILT HEAD terminals (P1 to P5) of the AW-RP400 and the RP terminal of the
AW-PH360 with a 10BASE-T straight cable when using the AW-RP400 pan/tilt control panel.
The maximum extension distance is 500 m when using UTP category 5 cables or their equivalent.
p Use the camera cable provided with the pan-tilt head to connect the AW-PH360 to the unit.
p Connect the iris control cable of the motorized zoom lens to the IRIS connector on the camera, and connect the zoom/focus
cable to the LENS I/F (1) connector on the pan-tilt head.
p Set the Controller Selection switch SW1 located inside the AW-PH360 to the "Left Side (RP605)".
p Select "SDI supported" as the transmission signal selection setting.
- 25 (E) -