Panasonic AW-HE870E Manual Del Operador página 84

Menu item setting/changing (User Mode)
ABB ACTIVE: This is displayed while ABB is being
executed.
ABB OK: This is displayed for 3 seconds after
ABB was completed successfully.
IRIS CONTROL NG:
This is displayed for 3 seconds when
the iris cannot be controlled by ABB.
OUT RANGE RGB: This is displayed for 3 seconds after
ABB was not completed successfully.
(A colour that could not be adjusted
is displayed with RGB)
V Character output selection
[ Character Mix
Component: Off, On / Composite: Off, On /
Option: Off, On]
This is used to select how the camera menu, status and
other characters are to be output (Off or On).
Component: How the characters to the component
signals (RGB, Y/Pb/Pr) are output is
selected.
Composite: Character output method for composite
signals and Y/C signals is selected.
Option: How the characters to the optional card are
output is selected.
Notes
p When the menu is started within 1 minute or
so after the camera has been turned on, the
characters are displayed in all the outputs.
p The selection of Option as the Character Mix
setting takes effect when an optional card has been
installed.
- 83 (E) -