Wgenlock Adjustment - Panasonic AW-HE870E Manual Del Operador

Adjustment

wGenlock adjustment

Phase adjustments must be performed with the camera
menu when external synchronizing signals are supplied to
the system in cases where multiple cameras are used or
peripheral devices are connected.
Please contact your dealer for the adjustment.
Notes
p When horizontal phase adjustment is moved, colour
phase is also moved.
Adjust colour phase whenever horizontal phase
adjustment is moved.
p Phases of the composite and Y/C signals are
interlocked for adjustments.
p Three-value synchronizing signals of the HD format
are not supported.
p When using external synchronization, only the output
signal for the selected video output format (Format)
will be synchronized (1080i, 720p, or 576i).
When selecting an HD format (1080i or 720p),
neither the VIDEO OUT signal (composite signal)
nor the Y/C signal output from the AW-CA50T8
S-Video terminal will be synchronized with the
external synchronizing signal.
To synchronize the VIDEO OUT signal (composite
signal) or the Y/C signal output from the
AW-CA50T8 S-Video terminal with the external
synchronizing signal, use "576i" as the video output
format (selected from the camera menu).
q Horizontal phase control
The phases of the HD signals (1080i, 720p) and SD signals
(576i) are interlocked for adjustments.
• When adjusting the phase of HD signals
Observe the waveforms of signal outputs on other HD
equipment and the HD analogue signal output of this unit
on a two-channel oscilloscope.
Then match the horizontal phase of both signals by
adjusting them with the horizontal phase control of the
camera menu.
- 55 (E) -