Panasonic AW-HE870E Manual Del Operador página 15

Major operating controls and their functions
Lens mount
2/3˝ bayonet type lens or a microscope adapter can be
mounted.
Lens fixing ring knob
Mount the lens on the camera and rotate the lens fixing
ring knob clockwise in order to fix the lens securely.
Camera mounting screw holes
(Inch screws: 1/4-20UNC)
Use these screw holes to secure the screws when the
camera is to be installed on a wall or ceiling, or when a
pan-tilt head or tripod is to be used. Also, attach the drop-
prevention wire to these screw holes using the mounting
screw for the wire (inch screw: 1/4-20UNC).
Camera mounting adapter
Use this when mounting the camera onto an on-site
bracket, pan-tilt head, or tripod.
MENU switch [MENU]
A menu will appear on the monitor screen when MENU
switch is pressed for at least 3 seconds.
The menu screen is cleared when the switch is pressed
for at least 3 seconds while the menu is displayed.
When this switch is pressed while an item is being
changed on a sub menu screen, the set values will revert
back to those prior to making changes.
ENTER/AWB switch [ENTER/AWB]
If this switch is pressed on the main menu screen, a
sub menu screen with selection items appears, and
if it is pressed on the sub menu screen, the selection
items start flashing to indicate that their settings can be
changed.
Pressing this switch while the camera is in a status where
settings can be changed finalizes changes.
This switch finalizes the "O.K." or "CANCEL" selection
when pressed in individual confirmation screens (see
pages 84 to 87 for details).
When the menu is not displayed or the camera is in
shooting mode, the automatic white balance control
(AWB) can be set with this switch.
- 14 (E) -