Specifications
The meter should be recalibrated annually. When calibrating, temperature
should be 18°C~28°C, and relative humidity should be less than 75%.
General
Range:
Overload protection:
Max. voltage between
measurement end and
ground:
Operational height:
Display:
Polarity indication:
Overload indication:
Sampling rate:
Auto off:
Power Source:
Battery low voltage
indication:
Temperature coefficient:
Operating temperature:
Storage temperature:
Dimension:
Weight:
www.grupotemper.com
Auto
Full measuring range overload protection
1000V DC or 750 AC RMS
max. 2000m
LCD, max. value 6599 digits
automatical indication, '-' means
negative polarity
Display shows'OL' or '-OL'
about 3 times/sec., simulation bar: 30
times/sec.
15 min
9V battery
LCD displays
symbol.
Less than 0.1×accuracy/°C
0°C ~ 40°C
-10°C ~ 50°C
225×86×33mm
about 320g (including battery)
KPA 02
Digital clamp meter
Instructions manual |
25