TROUBLESHOOTING
Never disassemble your laser rangefinder. Irreparable damage can result from unauthorized service attempts,
which also void the warranty.
If unit does not turn on, display does not illuminate:
• Depress Power/Fire button.
• Check and if necessary, replace battery. If unit does not respond to button presses, replace the battery with a good
quality CR2 3-volt Lithium battery.
If unit powers down (display goes blank when attempting to power the laser):
• The battery is either weak or low quality. Replace the battery with a new 3 -volt lithium battery (CR2).
If target range cannot be obtained:
• Make sure the display is illuminated.
• Make sure that the Power/Fire button is being depressed.
• Make sure that nothing, such as your hand or finger, is blocking the objective lenses (lenses closest to the target) that
emit and receive the laser pulses.
• Make sure unit is held steady while depressing Power/Fire button.
NOTE: The last range reading does not need to be cleared before ranging another target. Simply aim at the new target
using the display reticle, depress the Power/Fire button and hold until new range reading is displayed.
Technical Speci cations
Dimensions
Weight
Ranging Accuracy
Range
Magnification
Objective Diameter
Optical Coatings
Display
Power Source
Field Of View
Extra Long Eye Relief
Exit Pupil
Included Items
WARNING: This product uses a Lithium based battery. Lithium batteries can overheat and cause damage
if physically abused. Do not use batteries that are damaged or show signs of physical wear.
1.5 x 4 x 3 inches
8 oz.
Accurate to 1 yard
5–1300 Yards / 5–1189 Meters
7x
26 mm
Fully Multi-Coated
Black Mask LCD with Ultra Enhanced Backlight
3-volt lithium (CR-2)
300 ft. @ 1000 yards / 100 meters @ 1000 meters
16 mm
3.5 mm
Premium Carrying Case and CR2 Battery
7