Cleaning And Troubleshooting Your Waterpik; Water Flosser - Waterpik WP 100 Manual Del Usuario

8

CLEANING AND TROUBLESHOOTING YOUR WATERPIK

Cleaning
Before cleaning, unplug from the electrical outlet.
Clean the product when necessary by using a soft
cloth and mild non-abrasive cleanser.
The water reservoir is removable for easy cleaning
and is top rack dishwasher safe.
NOTE: Remove reservoir valve before placing
reservoir in dishwasher.
Remove
Removing Hard Water Deposits
Add 2 tablespoons of white vinegar to a full
reservoir of warm water. Set pressure control dial
to high, point the handle and tip into sink. Turn
unit ON and run until reservoir is empty. Rinse by
repeating with a full reservoir of clean warm water.
Leakage
If leaking due to a damaged hose, replacement
hoses and handles can be purchased at
www.waterpik.com or contact Water Pik Inc.
customer service for a self service repair kit.
If leakage occurs from the reservoir, ensure the
valve is right side up or contact Water
Pik Inc. customer service for
a replacement valve.
Service Maintenance
Waterpik
serviceable electrical items and do not require
routine service maintenance. For all parts and
accessories go to www.waterpik.com. You may
also call our toll-free customer service number at
1-800-525-2774 (USA).
Refer to the serial and model numbers
in all correspondence. These numbers are located
on the bottom of your unit.
Still have questions? Go to www.waterpik.com.
Replace

WATER FLOSSER

®
Water Flossers have no consumer-
®