AO Smith AO-WH-PREL Manual Del Usuario página 6

1
Turn off main water supply.
Drain water from water lines.
3
Wrap Teflon
®
adaptor. Screw firmly to filter head.
(See Figure 1)
Do not use pipe solvent (dope), as solvents in some types of pipe dope may cause
damage to plastic fittings. Do not over-tighten to prevent damage to filter head.
4
Loosely fit shut-off valves on both sides to calculate proper spacing of
components. Measure distance and mark pipe accordingly.
(See Figure 2)
tape (2-1⁄2 wraps) to the right around the 1" male x 1" street
ENSURE PROPER SPACING
2
Remove clear housing from filter
head and set aside.
FIGURE 1
FIGURE 2
NEED HELP? GIVE US A CALL 877.333.7108
3