CST/BERGER LM30 Manual De Instrucciones página 4

Ocultar thumbs Ver también para LM30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 16
Thank you for purchasing the LM30 Rotary Laser. Please read this manual thoroughly
before operation.
EN
The information contained herein is proprietary information of Robert Bosch Tool
Corporation, and is subject to change without notice.
Copyright © 2010 Robert Bosch Tool Corporation.
The information contained herein is proprietary information of Robert Bosch Tool Corporation and
is subject to change without notice.
This document shall not be copied or otherwise reproduced without Robert Bosch Tool
Corporation'swritten consent.
SAFE OPERATING PROCEDURES
WARNING: Be sure to read and understand all instructions in this manual before using this
product. Failure to follow all instructions may result in hazardous radiation exposure,
electric shock, fire, and/or bodily injury.
CAUTION: Use of controls or adjustments or performance of procedures other than those
specified in this manual, may result in hazardous radiation exposure.
CAUTION: The use of optical instruments with this product will increase eye hazard.
IMPORTANT: The following labels are on your laser tool for your convenience and safety. They
indicate where the laser light is emitted by the level. ALWAYS BE AWARE of their location when
using the level.
DO NOT place the laser tool in a position that may cause anyone to stare into the laser beam
intentionally or unintentionally. Serious eye injury could result.
DO NOT use any optical tools such as, but not limited to, telescopes or transits to view the laser
beam. Serious eye injury could result.
ALWAYS remove the batteries when cleaning the laser light aperture or laser lens.
DO NOT operate the laser tool around children or allow children to operate the laser tool. Serious
eye injury could result.
4 • LM30 Rotary Laser
ALWAYS make sure that any bystanders in the vicinity of
use are made aware of the dangers of
looking directly into the laser tool.
DO NOT remove or deface any warning or caution labels.
Removing labels increases the risk of
exposure to laser radiation.
DO NOT stare directly at the laser beam or project the
laser beam directly into the eyes of others. Serious eye
injury could result.

Publicidad

Tabla de contenido
loading

Tabla de contenido