CST/BERGER LM30 Manual De Instrucciones página 8

You may use this feature in either a level or plumb position.
1. Turn the unit on by pressing the control button.
2. Press three more times until the "LONG SWEEP" LED is lit. The rotary ad will quickly scan
back and forth to create a laser "chalk line".
3. To direct the sweep toward your target, grab the rotary head to stop its movement, and wait
for rotation pressure to relax (normally within a few seconds).
Rotate head to your desired position and release.
4. Length of the chalk line will vary depending on the distance of the LM30 from your working
surface; the angle of the long sweep is approximately 45°. To create a shorter, faster sweep,
press the control button once more ("SHORT SWEEP" LED will light); the angle of the short
sweep is approximately 22°.
Note: The Sweep Function of this unit is intended for indoor use only. Use of the LM30 in direct
sunlight may result in erratic operation of the Sweep Function.
Use of the LM30 in direct sunlight will not affect any other functions.
Remote Control RC30 - (Fig. 5)
Note: Remote control is included with LM30 Interier packages.
The remote controls Fast Rotation Speed, Slow Rotation Speed, Spot Mode, Long Sweep, Short
Sweep, and can be used up to a maximum of 100 feet (30 m) away from the unit. The user must
face the control panel for proper operation of the remote. Requires 2 AA Alkaline batteries.
1. Operates same as the single button on unit.
2. Rotate laser beacon counter-clock-wise when in sweep or spot mode.
3. Rotate laser head clock-wise when in sweep or spot mode.
APPLICATIONS (Fig.6)
Installing drop ceiling and grid and tiles. Use with Wall/Ceiling Mount
INDOOR LEVELING/PLUMBING: Window Frames, Cabinets & Shelves, Doors & Windows, Erecting
Walls & Partitions, Aligning 90° Joints & Edges, Floors, Tile Work.
OUTDOOR LEVELING/PLUMBING: Porches & Decks, Fencing, Flagpoles, Batterboards,
Landscaping.
8 • LM30 Rotary Laser