Publicidad
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
Welcome and congratulations on the purchase of your new
MR. COFFEE
Coffee Mill. Your new Coffee mill will wake up
®
with you in the morning and provide you breaks and treats
during your hectic daily activities. How you enjoy your MR.
COFFEE
®
Coffee Mill is up to you!
SPECIAL CORD SET INSTRUCTIONS
1. A short power supply cord is provided to reduce
the hazards resulting from a person or pet becoming
entangled in, or tripping over, a longer cord.
2. An extension cord may be purchased and used if care is
exercised in its use.
3. If an extension cord is used, the marked electrical rating
of the extension cord must be at least 10 amps and 120
volts. The resulting extended cord must be arranged
so that it will not drape over a countertop or tabletop
where it can be pulled on by children or tripped over
accidentally.
4. This appliance has a polarized plug (one blade is wider
than the other). To reduce the risk of electric shock,
this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not
modify the plug in any way.
5. You can customize the length of the power cord so that
it is the exact length you desire. To increase the length of
the power cord: grasp the power cord (not the power
plug) and gently lift it out of the slot, then pull it away
from the Coffee mill. To decrease the length of the power
cord: Grasp the power cord (not the power plug), lift it
out of the slot and gently feed it into the Coffee mill.
4
IDS55-NP_15ESM1.indd 5-6
TABLE OF CONTENTS
Section
Important Safeguards...............................................2
Diagram Of Parts.....................................................6
Introduction..............................................................7
How To Grind The Beans................................. .........7
Coffee Measurement Chart..........................................7
Grinding Tips And Grinding Time........................ ... ... ..9
Service And Maintenance.........................................10
Warranty Information..............................................11
DIAGRAM OF PARTS
FIGURE A
4
5
1. TRANSPARENT COVER
2. ON/OFF SAFETY SWITCH
3. STAINLESS STEEL GRINDING BOWL
4. BLADE
5. CORD
page#
3
1
2
5
6/9/15 10:23 AM
Publicidad
