Nameplate - Binzel Abicor BRS-LC Instructivo De Servicio

BRS-LC
Internal operating voltage/power supply
Protection type
5/2 directional valves
Nominal voltage
Power consumption
Induct. proximity switch NO contact (pnp)
Operating voltage
Current consumption
Allowed residual ripple
Permanent current
Current consumption
Voltage drop
Tab. 5 Electrical connections
NOTICE
• To guarantee the maximum power and useful life of the torch cleaning station, operate it with clean
 Tab. 4 Pneumatic distributor block on page EN-6
Pneumatic motor / nominal speed with oiled air
Air consumption
Tab. 6 Compressed-air motor BRS-LC
3.2 Abbreviations
BRS-LC Torch cleaning station
TCP Tool Center Point
Tab. 7 Abbreviations
Units of measurements in drawings or diagrams
Tab. 8 Dimensions

3.3 Nameplate

The cleaning station BRS-LC is labelled with a nameplate on the back as follows:
Fig. 2
and oiled air.
Cleaning station nameplate BRS-LC
3 Product description
24 VDC / 200 mA
IP 21
24 VDC
4.5 W
10 - 30 V DC
approx. 4 mA (at 24 V DC)
Vss < 10 %
max. 200 mA
approx. 4mA (24V)
approx. 1.2 V (200 mA)
approx. 800 rpm at 6 bar
approx. 500 l/min
Millimetres [mm]
EN - 7