Inflator Nozzle Adapter Operation - ArmorAll DVTB202 0901 Manual De Instrucciones

Tabla de contenido

Publicidad

13
17
1. Make sure the collection tank is empty before using as a blower.
2. Connect the hose to the blower port. (Fig. 13)
3. Push required accessories onto the free end of the hose.
4. Make sure the battery is correctly installed. (Fig. 14) For installation instructions see page 7.
5. Turn the motor on by flipping the switch to the 'I' ON position. (Fig. 15)
Once you have completed blowing, turn the motor off by flipping the switch to the 'O' OFF
position. (Fig. 16) O = OFF
6. Remove the battery. (Fig. 17)
INFLATOR NOZZLE ADAPTER
INFLATING AN OBJECT
18
The included inflator nozzle adapter allows any wet/dry vacuum with a blower function to be used
to inflate items such as air mattresses and recreational floatation devices. These nozzles can also
be used to focus the air flow, allowing for more concentrated blowing.
1. Make sure the collection tank is empty before using the wet/dry vac to inflate.
2. Connect the hose to the blower port.
3. Push the desired inflator nozzle onto the free end of the hose. (Fig. 18)
4. Make sure the battery is correctly installed. For installation instructions see page 7.
5. Insert the inflator nozzle into the air valve of the item being inflated. (Fig. 19)
6. Turn the motor on by flipping the switch to the 'I' ON position. Once you have completed
inflating, turn the motor off by flipping the switch to the 'O' OFF position.
7. Remove the battery.
14
I = ON
OPERATION
19
15
10
16

Publicidad

Capítulos

Tabla de contenido
loading

Productos relacionados para ArmorAll DVTB202 0901

Tabla de contenido