For Your Safety; Designated Use; Safety Instructions - Waldman TANEO STLZ 12 Instrucciones Para El Uso

For your safety

1. For your safety
The light has been designed in accordance
with state-of-the-art standards, manufac-
tured with utmost care using high-quality
materials, and tested.
Nevertheless, its use may constitute a risk
to persons or cause material damage.
X Read all enclosed instructions and infor-
mation.
X Please observe the warnings included
in the documentation and attached to
the unit.
X The device must only be used in tech-
nically perfect condition, and only by
persons being aware of the risks and
dangers involved in operating the
device.
X Keep this document available near the
device.
1.1

Designated use

The light is a workplace light and is
designed for single workplace lighting. The
light is used in addition to general lighting.
The light model STZL 24 AR has been espe-
cially designed for use in electrostatically
protected areas (EPA).
1.2

Safety instructions

Explosion hazard
Operating the light in rooms subject to
explosion hazards can trigger an explosion
and result in serious injuries or death.
X Do not operate the light in rooms sub-
ject to explosion hazards.
Danger due to electric current
Improper use and faulty work on the light
may result in injuries and material damage.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and make
sure that they are identical.
X Disconnect a damaged connecting
cable immediately from the power sup-
ply and have it replaced by the manufac-
turer, by a service technician authorised
by the manufacturer or by a person with
comparable qualification.
X Have the repair performed only by the
manufacturer or by a service technician
authorised by the manufacturer.
X Have maintenance work carried out by
a skilled electrician only.
X Before performing work on the light,
disconnect the light from the power
supply.
Mount the light in a stable position.
A toppling light can result in personal inju-
ries and material damage.
X Mount the light in a stable position.
Hazard caused by unsuitable spare parts
Unsuitable spare parts can result in injuries
and material damage.
X Only spare parts released by the man-
ufacturer may be used as spare parts.
Risk of corrosion
Operating the light in moist rooms can
result in material damage.
X Operate in dry rooms only.
ENG
17