Connection; Connecting The Grounding Cable; Connecting The Light To The Mains Voltage - Waldman TANEO STLZ 12 Instrucciones Para El Uso

ENG
5.

Connection

NOTICE
Material damage caused by wrong
handling.
Omission of the ESD protection and
damage to electronic components.
X Lights suitable for EPA must
remain plugged in in electrostati-
cally protected areas (EPA).
X Connect the luminaire to an
inspected electric mains that
meets the legal requirements
using the delivered plug-in power
supply only.
X Leave the grounding cable plugged
in in EPA areas.
5.1 Connecting the grounding
cable
NOTE: This chapter applies only to lights
suitable for EPA.
Fig. 5: Pushbutton for grounding cable.
X Connect one end of the provided
grounding cable to the pushbutton A
of the light, see Fig. 5.
X Connect the other end of the ground-
ing cable to a grounding contact point.
22
5.2 Connecting the light to the
mains voltage
NOTICE
Material damage caused by wrong
mains voltage.
Damage or destruction of the light.
X Compare the mains voltage with the
nominal voltage and the frequency
specified on the rating plate and
make sure that they are identical.
X Connect the connecting cable to the
power supply unit.
X Plug the mains plug into a socket.
A
Connection