Install The Fan Shroud; Install The Bracket - Corsair HYDRO Serie Guia De Instalacion

HG10 – N780 Edition

4. Install the fan shroud

Now that the stock blower has been installed onto the bracket, place the HG10 fan shroud onto the bracket and
tighten the four screws to secure.

5. Install the bracket

Reconnect the stock blower's power cable to the card and mount the bracket onto the card. Next, use the
provided M3 screws to secure the bracket. Hand tighten the screws until the bracket is snug, but do not
over torque.
6