Plu (Price Look Up) Function; Preset Key Function; Fix Key Function - OHAUS RE Serie Manual De Operación

OHAUS CORPORATION

PLU (Price Look Up) Function

The PLU function can store 100 PLU. They can be used for frequently sold goods, where the data (prices
or/and tare* depending on the setting in factory) can be looked up by simply entering the PLU number. The
default is price only.
*Preset tare is not permitted in EU countries.
Store a PLU (unit price or/and tare)
Enter the required unit price or/and tare.
PLU Press and hold the PLU key until a long beep is heard. In the weight display appears: "PLu".
Enter the PLU number (between 1 and 100) and wait for approx. 2 seconds, until the scale beeps twice.
Recall a PLU (automatic search function off, refer to SET-UP, step 5)
Input the required PLU number, then press the PLU key. The stored data will appear in the display.
Recall a PLU (automatic search function on, refer to SET-UP, step 5)
Input the required PLU number, the stored data will appear in the display.
Notice: To call PLU 12, press 1 and 2 within 2 seconds, if the 2 is not pressed within 2 seconds, the PLU
number 1 will be called up.
Preset
Key Function
The scale has 16 preset keys, which can store another 16 or 32 PLU and recall theses PLU directly.
Store a PLU in a preset key
Enter the required unit price or/and tare.
~ Press and hold the required M-key until a long beep is heared, then two continous beeps will be heard to
M1 M16
indicate the data have been stored.
Recall a PLU in a preset key
Press the required M-key, the data stored will appear in the display.
When double click function is on, referring to SET-UP, step 6, one preset key can store and recall 2 PLU. The
way to store and recall the first PLU is same as the operation in "Store a PLU in a preset key" and "Recall a
PLU in a preset key".
Store the second PLU in a preset key (double click function is on, refer to SET-UP, step 6)
Enter the required unit price or/and tare.
Press and hold the required M-key until a long beep is heard, then press this M-key again and release it
within 1 second, "L 2" will appear to show this data is stored by double-clicking M-key, and two beeps will
finish the storage.
Recall the second PLU in a Preset (double click function is on, refer to SET-UP, step 6)
Double click the required M-key within 1 second, the "L 2" will be shown in the weight display for 1 second,
then the data stored by double-clicking this M-key will appear in the display.

Fix Key Function

Normally the tare and unit price will be cleared after each weighing, with key-FIX the tare and unit price can
be fixed.
FIX Press the key-FIX and cursor FIX will be lit, the tare and unit price will remain until new value is entered.
ON/OFF
Press the key-FIX again to switch off the fix function.
RE Series
GB
9