Adjusting The Counterplate; Cleaning The Machine; Maintenance Interval; Service Intervals - Viking GE 135 L Manual De Instrucciones

10.11 Folding in machine
GE 140 L
● Disconnect the machine.
( 10.3)
● Hold the machine with one hand on
handle (1).
● Pull locking lever (2) to the stop in the
direction of the arrow and hold. The
upper machine is released.
● Slowly guide upper machine (3)
downwards to the stop and hold.
● Release locking lever (2) and ensure
that the upper machine is securely
locked in place.
10.12 Folding out machine
GE 140 L
● Hold the machine down with one
hand on handle (1).
● Pull locking lever (2) to the stop in the
direction of the arrow and hold. The
upper machine is released.
● Slowly pull upper machine (3) upwards
to the stop and hold.
● Release locking lever (2) and ensure
that the upper machine is securely
locked in place.
18
11. Maintenance
13
Risk of injury:
Carefully read the section "For your
safety" ( 4.), particularly the
subsection "Maintenance and
repairs" (
safety instructions exactly before
performing any maintenance or
cleaning operations on the
machine.
Disconnect the mains plug before
performing any maintenance
operations.

11.1 Adjusting the counterplate

The machine must be free of
14
shredding material.
Step 1
● Switch on the machine (on/off switch in
"feed" position). (
Step 2
● With the machine running, slowly turn
adjustment screw (1) clockwise using
Allen key (2). This presses the
counterplate against the blade roller
inside the machine. The counterplate is
properly adjusted when a few
aluminium shavings fall through the
ejection chute.
The counterplate is adjusted and the
machine is ready for operation.
4.7), and follow all
15
10.7)

11.2 Cleaning the machine

Maintenance interval:

After each use
Clean the machine thoroughly each time it
has been used. Care of the machine will
protect it against damage and extend its
service life.
The machine may only be cleaned in the
position shown.
Never spray water onto
motor components, seals,
bearing points or electrical
parts such as switches. This
would result in expensive
repairs.
If you are unable to remove
the dirt and accumulated
deposits with a brush, a damp
cloth or a stick, VIKING
recommends the use of a
special cleaner (e.g. STIHL special
cleaner).
Do not use aggressive cleaning agents.
Electric motors are splashproof.
Protect shredding tools, incl. the shredding
chamber using a commercially available
anti-corrosion agent (e.g. rapeseed oil).

11.3 Service intervals

We recommend that you have your garden
shredder serviced once a year by a
specialist dealer.
VIKING recommends VIKING specialist
dealers.
0478 201 9811 B - EN
16