Siemens SITRANS F Serie Manual De Usuario página 28

Connecting
3.4 Programming the Transmitter
3. Press <Right Arrow> to create Site name (e.g., ABC).
Note
To select letters: Press <Right Arrow> to cursor and then press <Up/Down Arrows> to
select letters. Press <ENT> when done.
4. Press <Left Arrow> and return to the [Channel Setup] menu.
Note
After site configuration procedures that follow are complete the newly created site must
be saved again to retain the new site data. Refer to the Save/Rename Site procedure
below.
Select Pipe Class
1. Press the <Right Arrow> to select [Pick Pipe Class]. Press <Right Arrow> again and
2. Press <ENT> to select.
3. Pre-programmed Pipe Size and relevant pipe parameters will appear in menu cells. Press
4. Press the <Left Arrow> and return to the main menu.
26
①
Insert desired name (8 characters max.)
scroll to desired Pipe Class.
<Right Arrow> and scroll to desired pipe size. Press <ENT>. Enter dimensions manually
if pre-programmed dimensions do not match application.
FUS1010 IP65 NEMA 4X
Operating Instructions, 7/2010, A5E03086486-02