Operating Hints; Setting The Time Program - Honeywell TheraPro HR90 Guia Del Usuario

THERAPRO HR90

Operating hints

Operating the radiator controller
comfortably
The radiator controller can be removed from the radiator
to facilitate programming.
1
1. Unlock the radiator controller. To do so, push the
slide at the radiator controller towards unlocked.
2. Pull the radiator controller off the valve baseplate.
8. Programming – Time program
Planning the time program
You can specify up to 6 setpoints per day.
The following has to be assigned to each setpoint:
• One of the three preset temperatures (Comfort
temperature 1, 2 and Setback temperature).
• Beginning of the Heating/Setback period
• End of the Heating/Setback period
Example
12am 6am
COMFORT2
COMFORT1
HEATING
LOWERING/
SAVING
SAVING
SETPOINTS
1
The example shows the following time program:
Set-
point Time
1 6:00 am – 9:00 am
2 9:00 am – 12:00 pm 61 °F (Setback temperature)
3 12:00 pm – 2:00 pm 68 °F (Comfort temperature 1)
4 2:00 pm – 5:00 pm
5 5:00 pm – 10:00 pm 71.5 °F (Comfort temperature 2)
6 10:00 pm – 6:00 am 61 °F (Setback temperature)
NOTE: An overview of the program structure is
shown on the last page of these instructions.
Week program
You can adjust the time program to your personal weekly
routine. You have the following options to this purpose:
33-00084EFS—02
2
M35642
12pm 6pm
HEATING
2 3 4 5 6
M35643
Temperature
68 °F (Comfort temperature 1)
61 °F (Setback temperature)
• Separate time programs for weekdays Mo – Fr (1 – 5)
and weekend Sa – Su (6 – 7)
• One time program for the days of the week Mo – Su (1
– 7)
• A different time program for each day of the week Mo,
Tu, We, Th, Fr, Sa, Su (1, 2, 3, 4, 5, 6, 7)
NOTE: We recommend that you write down your
time program before beginning program-
ming.
Lost your way in the program?
Press the button AUTO/ECO/MANU
Automatic is displayed. The last entry is rejected.

Setting the time program

Selecting weekdays
1. Press the PROG button.
COMFORT 1 is displayed.
2. Turn the adjustment dial clockwise until program is
displayed.
3. Press the OK button and use the adjustment dial to
select the desired weekdays for your time program:
MO - FR, SA - SU, MO - SU, MO, TU, ..., SU or day
off
4. Confirm the selected weekdays with the OK button.
The temperature as well as the beginning and end
of the first setpoint, e.g.:
• The end of a setpoint is also the beginning of the next
setpoint.
• You can use the adjustment dial to change from one
setpoint to another and thus view the setting of all the
programmed setpoints.
• Only the programmed setpoints are displayed.
12am
Editing setpoints
1. In order to edit the displayed setpoint press the OK
button.
The temperature display flashes.
2. Use the adjustment dial to select the desired tem-
perature (Comfort temperature 1, 2 or Setback tem-
perature) for the selected setpoint and confirm with
OK.
The beginning of the selected setpoint flashes.
NOTE: The time scale for programming of the set-
points begins at 3:00 in the morning and
ends at 2:50 on the following day.
3. Use the adjustment dial to set the desired beginning
for the selected setpoint and confirm with OK.
The end of the selected setpoint flashes.
4. Use the adjustment dial to set the desired end of
the selected setpoint and confirm with OK.
Saved is displayed briefly. Subsequently the tem-
perature as well as the beginning and end of the
setpoint are displayed.
5. For the further setpoints also select the temperature
as well as the beginning and end of the setpoint as
described in Steps 1 to 5.
6
°
M35644