Sime FORCED 200 Manual Del Usaurio página 37

6.. Repeat.the.operation.for.the.top.part.
7.
For.the.two-collector.model,.firstly.place.the.left.one.lifting.the.upper.and.lower.support.part.of.the.col-
.
lector.and.the.washers.(7)..Slightly.tighten.the.M8.screws.and.nuts.with.the.collector.support.parts.when.
the.same.collector.is.placed.underneath,.in.order.to.easily.temporary.assemble.and.centre.it.with.the.
system...
8
Join.the.second.collector.and.fasten.the.fittings..*
...
9... Direct.the.solar.collector.and.firmly.tighten.the.base.using.the.4.inserts.and.screws.(M10x60).
* Tighten the fittings ONLY. ANY BREAKAGE DUE TO THE TORSION OF THE PIPE BUNDLE IS NOT COVERED BY THE WARRANTY.
7
5
FR
ENG
IT
ES
37