Sime FORCED 200 Manual Del Usaurio página 39

6.
For.the.two.collector.model,.firstly.place.the.left.one.lifting.the.upper.and.lower.support.part.of.the.collector..
Slightly.tighten.the.M8.screws.and.nuts.with.the.collector.support.parts.when.the.same.collector.(7).is.placed.
underneath,.in.order.to.easily.temporary.assemble.and.centre.it.with.the.system.Position.the.Ø22.fittings.me-
chanically.fastened.to.the.collector.edges.
7. Join.the.second.collector.and.tighten.the.fittings..*
9.
Position. and. mechanically. fasten. the. Ø22. socket. on. the. top-right. part. and. on. the. bottom-left. part. of. the.
collector(s).
* Tighten the fittings ONLY. BREAKAGE DUE TO THE TORSION OF THE PIPE BUNDLE IS NOT COVERED BY THE WARRANTY.
FR
ENG
IT
ES
39