Standard Equipment; Icons; Pre-Operation Inspection - RIDGID TC-40 Manual Del Usuario

Wall Thickness ...Minimum All Materials
Pipe Materials ......PVC, CPVC, PEX, PE,
Weight..................2 lbs, 13 oz (1.3 kg)
Power Supply ........Rechargeable Lithium-
Estimated Cuts Per
Charge ....................250 Cuts
Dimensions:
Length ................9
Width..................9
Height.................2
Charger Input .........100-240V 50/60Hz 190mA
Charger Output ...12.6V DC 0.5A
Charging Time ....3 hours Approx.
NOTE! This charger and batteries are not
compatible with other models of
RIDGID Li-Ion Batteries and charg-
ers. See Accessories section for bat-
teries compatible with this charger.

Standard Equipment

The TC-40 cutter comes with the cutter, charg-
er, one battery pack and carrying case.
The TC-40 Cutter is protected under various
U.S. and International patents.

Icons

Blade Reverse
Blade Forward
Light Switch
Blade Replacement
Alignment Arrows
Blade Release
Button
Model TC-40
PATENT PENDING
12V
Authorized Representative:
SERIAL NUMBER
Manufacturer:
HBQ01000MMYY
Made In China
Date Code
Figure 1 – Machine Serial Number
The machine serial number is located on
the side of the cutter. The last 4 digits indi-
All Other Materials 1
(42 mm)
Geberit Mepla ≤ 32 mm
0.10" (2.5 mm)
PB, Rubber Hose, Multi-
layer (PEX-AL-PEX)
(Tool and Battery)
Ion Battery Pack (12 Volt)
7 / " (25 cm)
8
1 / " (24 cm)
2
1 / " (5.5 cm)
8
Double
Insulated
Indoor Use Only
Do Not Dispose
Of Electrical
Equipment With
Household
Waste
DC6A
Ridgid Tool Europe N.V.Heverlee,3001
Belgium
Ridge Tool Company, Elyria, OH / U.S.A.
Ridge Tool Company
cate the month and year of the manufac-
5 / "
8
ture. (MM = month, YY = year)
Blade
Pipe
Cradle
Blade Reverse
Switch
Blade Forward
Switch
Figure 2 – TC-40 Cutter, Battery Charger and
Battery Pack

Pre-Operation Inspection

Before each use, inspect your TC-40 Cut-
ter, battery and charger and correct any
problems to reduce the risk of serious
injury from electrical shock or other
causes and prevent equipment damage.
Blade is sharp. Handle with care to pre-
vent cuts.
1. Confirm that the battery pack is removed
from the TC-40 Cutter and the charger is
unplugged from the battery and outlet.
To remove battery pack from the TC-40
Cutter, with dry hands, squeeze the re-
lease button and pull the battery pack out
of the tool handle (see Figure 3) .
Figure 3 – Removing Battery
TC-40 Cutter
Light Switch
Battery Pack
Battery Charger
WARNING
Battery
Level
Indicator
Blade
Release
Button
5