Residual Risks - EBARA GS Manual De Instrucciones Y Mantenimento

Instruction and Maintenance Manual
Low rotation speed.

8.6 RESIDUAL RISKS

The use and maintenance of the following pieces of equipment may lead to risks beyond
the capacity of the manufacturer and, therefore, the user must pay the utmost attention
to maintenance work and the handling of the equipment. The following risks need to be
taken into account:
Operation
Maintenance
Transport and lifting
- The bearings are blocked.
- Stator short-circuited.
- Stator earthed.
- Low voltage.
- Poor Star/Delta
commutation.
- Overloading.
- Defective electrical
connection.
Risk
- Burns
- Damage caused due to
it being empty or due to
pressure
- Damage caused by
entrapment
- Impacts and falls
- Repair the bearings.
- Repair in specialist
workshop.
- Repair in specialist
workshop.
- Change the nominal
voltage.
- Correct the cabling.
- Reduce the current.
- Correct the electrical
connections.
Measures to be taken
- Wait until the temperature
goes down
- Check the temperature
before touching
- Stop the pump and
proceed very carefully
- Stop the pump and
proceed very carefully
- Always fit protection guards
- Keep your distance from
rotating parts
- Proceed with care
EN
23