Ikegami ISD-A21 Manual De Instrucciones página 11

5-4-3. LIGHT CONTROL
(1)Select LIGHT CONTROL on the main
menu screen. Press the E button, and
the screen at right shows up.
* The IRIS LEVEL item appears only
when the lens selector switch at the
camera's back is set at DC.
(2)BACKLIGHT CMP.
Highlight this item and the backlight
compensation modes can be selected (ON, 1SPOT, 2SPOT and OFF).
① ON
Usual backlight compensation is made.
② 1SPOT
Select "ISPOT" and press the "E" button,
and the screen shown at right appears.
Highlight "ADJUST ZONE" and press
the "E" button, and the photometric
range setting screen shows up.
Each time the E button is pressed, the
photometric frame color turns blue,
green and red in this order.
• Blue
Using the U, D, L or R button, the
field can be moved wherever you like.
• Green
Using the U, D, L or R button, the
field can be enlarged.
• Red
Using the U, D, L or R button, the field can be reduced.
* To quit the field setting screen, hold down the E button longer than 2 seconds.
Once the 1SPOT ZONE screen appears, select RET and press the E button. The
previous menu shows up.
③ 2SPOT
As with the 1SPOT mode, two photometric fields can be preset. Take the same
procedure as for the 1SPOT mode.
④ OFF
The backlight compensation function is off.
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
→ＢＡＣＫＬＩＧＨＴ ＣＭＰ． ＯＦＦ
Ｗ．ＤＹＮＡＭＩＣ
ＩＲＩＳ ＬＥＶＥＬ
ＬＥＮＳ ＩＲＩＳ ＡＵＴＯ
ＲＥＴ
１ＳＰＯＴ ＺＯＮＥ
→ＡＤＪＵＳＴ ＺＯＮＥ
ＲＥＴ
ＳＰＯＴ ＺＯＮＥ−１ ＥＮＴ：２ＳＥＣ→ＲＥＴ
E-9