5-4-6. SYNC
(1)The INT and LL modes can be
selected with the L and R buttons.
(2)INT
The internal sync mode is selected.
(3)LL
The line lock mode is selected. Press the
E button, and the screen at right shows
up.
① PHASE
With the L or R button, move the marker to finely adjust the phase.
② +90DEG
With the E button, the phase angle can be adjusted to 0°, 90°, 180° or 270° in the
increment of 90°.
③ RET
Used to go back to the main menu screen.
5-4-7. MENU LOCK
The menu lock function protects saved settings against accidental modifications.
(1)Locking
Get the saved settings locked with the L and R buttons.
(2)Operation
When locked, EXIT alone is effective and all the other actions are inoperative.
(3)Unlocking
Press the U, R, D, L, U, D and E buttons in this order. If a wrong button is pressed
halfway, start all over again.
5-4-8. SPECIAL MENU
(1)Highlight SETUP on the main menu
screen and hold down the L and R
buttons together. The SPECIAL MENU
screen at right shows up.
SYNC LL
→PHASE
+90DEG
RET
SPECIAL MENU V1.00
→PAGE 1/2
CHROMA
DETAIL
SETUP 7.5IRE
MONITOR CRT
RESOLUTION NORMAL
DNR OFF
RET
E-12