5-2. SETUP switches and their functions
SET UP
U
L
R
D
E
Up Switch (U)
Down Switch (D)
Right Switch (R)
Left Switch (L)
Enter Switch (E)
* To enter the setup mode, hold down the E button longer than 2 seconds.
5-3. Entering the setup mode and its basics
5-3-1. SETUP MENU (Main menu)
S E T U P M E N U
→CAMERA ID OFF
DAY/NIGHT AUTO
LIGHT CONTROL
GAIN
WHITE BALANCE ATW
SYNC INT
MENU LOCK OFF
SETUP EXIT
(1)CAMERA ID
(2)DAY/NIGHT
(3)LIGHT CONTROL The backlight compensation and spot photometry modes are
(4)GAIN
(5)WHITE BALANCE The white balance mode is selected. The manual white balance
(6)SYNC
(7)MENU LOCK
(8)SETUP
* New settings are not saved if EXIT is selected to quit the menu.
The pushbuttons and their markings at left are provided on the back
of the camera.
Used to select SETUP items (up and down).
Used to modify the settings.
Used to enter and quit the setup mode and to save the settings.
Up to 24 characters can be displayed onscreen.
The day (color) or night (B/W) mode is selected.
selected. The wide dynamic level and DC type iris lens are adjusted.
The gain control and electronic sensitivity up modes are selected.
The electronic sensitivity multiplying factor is also selected.
settings are made.
The sync systems (INT and LL) are selected and set up.
The saved settings can be locked.
The EXIT, CANCEL or RESET action is selected and executed.
① EXIT:
Used to save the settings and to quit the menu.
② CANCEL: Used to return the settings to the previously saved ones.
③ RESET:
Used to return the settings to the factory ones.
Hold down the E button longer than 2
seconds, and the menu at left appears
onscreen. A highlighted item is now selected.
E-6