Setup Procedures - Ikegami ISD-A21 Manual De Instrucciones

5-3-2. SPECIAL MENU
ＳＰＥＣＩＡＬ ＭＥＮＵ Ｖ１．００
→ＰＡＧＥ １／２
ＣＨＲＯＭＡ
ＤＥＴＡＩＬ
ＳＥＴＵＰ ７．５ＩＲＥ
ＭＯＮＩＴＯＲ ＣＲＴ
ＲＥＳＯＬＵＴＩＯＮ ＮＯＲＭＡＬ
ＤＮＲ ＯＦＦ
ＲＥＴ
(1) PAGE
(2) CHROMA
(3) DETAIL
(4) SETUP
(5) MONITOR
(6) RESOLUTION
(7) DNR
(8) VIDEO STANDARD Used to switch between the video signal systems (NTSC/PAL).
(9) COLOR BAR
(10)PROGRES.SCAN Used to select the Interlace or Progressive mode.
(11) RS-485ID
(12) RET

5-4. Setup procedures

5-4-1. CAMERA ID
(1)CAMERA ID ON/OFF setting
Highlight CAMERA ID. Using the E, L
or R button, access the ON/OFF
setting. Decide the ON or OFF setting
with the L or R button.
Selection of page 1/2 or 2/2.
Used to adjust the chroma level.
Used to adjust the details.
Used to select the setup levels (0 IRE and 7.5 IRE).
Selection of monitor CRT or LCD
Used to select the NORMAL or HIGH resolution mode.
Switching on and off of noise reduction.
Used to turn on and off the color bars.
Used to preset an ID number (1 thru 207) for RS-485 communication.
Used to go back to the main menu screen.
Highlight EXIT on the SETUP MENU
screen. Hold down the L and R buttons
together, and the screen at left appears
onscreen.
(Page 1/2 shown at left)
Ｓ Ｅ Ｔ Ｕ Ｐ Ｍ Ｅ Ｎ Ｕ
→ＣＡＭＥＲＡ ＩＤ ＯＦＦ
ＤＡＹ／ＮＩＧＨＴ ＡＵＴＯ
ＬＩＧＨＴ ＣＯＮＴＲＯＬ
ＧＡＩＮ
ＷＨＩＴＥ ＢＡＬＡＮＣＥ ＡＴＷ
ＳＹＮＣ ＩＮＴ
ＭＥＮＵ ＬＯＣＫ ＯＦＦ
ＳＥＴＵＰ ＥＸＩＴ
E-7