Suction Hose - Pentair Flotec HYDROBLASTER 2.5 V Manual Del Usuario

EN
SUCTION PORT

SUCTION HOSE

DISCHARGE HOSE INSTALLATION
Use a commercially available hose and hose connector, and clamp provided with the pump.
It is best to use a short, large-diameter hose, because that will reduce fluid friction and improve pump output. A long
or small-diameter hose will increase fluid friction and reduce pump output.
Tighten the hose clamp securely to prevent the discharge hose from disconnecting under pressure.
HOSE CONNECTOR
DISCHARGE HOSE
22
SEALING WASHER
HOSE CONNECTOR
(COMMERCIALLY
AVAILABLE)
HOSE CONNECTOR (COMMERCIALLY AVAILABLE)
HOSE CLAMP
HOSE CLAMP
HOSE COUPLER
HOSE CLAMP RING
SUCTION HOSE
HOSE CLAMP
STRAINER
HOSE CLAMP
ORIGINAL INSTRUCTIONS