Settings Menu; Description Of The Menu - Baxtran SML Manual Del Usuario

6. SETTINGS MENU

Enter the menu
Switch on the weighing hook and during the self-testing press simultaneously the keys
The message P1--- is going to appear on the screen. Introduce your password 000 by default
Using the key ....choose the digits in edition and using the key
Choosing the function
The key enables the user to navigate among the menu functions
Access to one function
The key enables the user to access to the function which is shown on the screen.
Change the adjustment
The key enables the user to access to the function which is shown on the screen.
Confirm adjustment
The key allows to the user to confirm the changes done in the function and go back to the functions menu
Exit the function/menu
The key allows to the user to go back to the functions menu without saving the changes done. Or exit the menu and go back to the weighing mode, if
the user is already in the functions menu.
6.1 MENU DESCRIPTION:
Do not modify the parameters blocked by the switch of calibration if it is not strictly necessary. A wrong configuration of them can lead
to malfunctions of the equipment.
F1 bt baud rate RS-232
F2 SP Speed of the analogue digital converter ( parameter blocked by the calibration switch)
S 1
S 2
S 3
S 4
S 5
F3 iP Internal accounts
It shows the value of the internal points of the converter
F4 Ut Weighing Unit ( parameter blocked by the calibration switch)
Ut oF
Ut Lb
Ut tJ
22
without function

7,5 times/second  default value

15 times/second

30 times/second

60 times/second

90 times/second

kilos 

pounds

taels

y
increase the flashing digit. Confirm with the key
default vaule
USER'S MANUAL SML EN