ROUTINE MAINTENANCE INSTRUCTIONS
Style 3419 Portable Electric Monitor
The following maintenance procedures will extend the service life of this appliance .
A . Examine the points of the ground spikes in the portable base . If the flat of any spike exceeds
be replaced . ORDER GROUND SPIKE SERVICE KIT #9190 .
B . Check the spring loaded spike holders in the portable base to ensure that they move freely . Use a dry spray lubricant if
lubrication is required .
C . Check that the elevation stop operates properly and must be released to lower the unit below 35˚ elevation .
D . Check both the inlet clappers (dual inlet base only) function properly . Lubrication is not normally required in this area .
E . Check that the latch of the safety chain hook engages properly in the chain .
F . If any of the parts do not function properly, contact Akron Brass for repair instructions or return the unit to the
Akron Brass Company .
/
" (1 . 5 mm) diameter, it must
1
16
6