Use Of The Appliance; Acoustic Signals - AEG FAVORIT 55000 VI Manual De Instrucciones

10

Use of the appliance

• The display shows the time of the washing programme or of the delay start.
– It is necessary to cancel the programme or the delay start to go back to the setting
mode. Refer to 'Select and start a washing programme'.

Acoustic signals

You can hear the acoustic signals in these conditions:
• The washing programme is completed.
• The level of the water softener is adjusted electronically.
• The appliance has a malfunction.
Factory setting: on.
Deactivating the acoustic signals
1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold function button (B) and function button (C) at the same time until
the indicators of function buttons (A), (B) and (C) flash.
4. Release function button (B) and function button (C).
5. Press function button (C),
• The indicators of function buttons (A) and (B) go off.
• The indicator of function button (C) continues to flash.
• The display shows the setting of the acoustic signals.
6. Press function button (C) to change the setting
7. Deactivate the appliance to confirm.
To activate the acoustic signals again, do steps (1) through (7).
USE OF THE APPLIANCE
1. Be sure that the set level of the water softener agrees with the water hardness in
your area. If not, adjust the water softener.
2. Fill the salt container with dishwasher salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appliance.
5. Set the correct washing programme for the type of load and soil.
6. Fill the detergent dispenser with the correct quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets ('3 in 1', '4 in 1', '5 in 1'), use the multitab function
(refer to 'Multitab function').
The acoustic signals are on.
The acoustic signals are off.