8
Control panel
Visual signal
• When the washing programme starts, a red visual signal shows on the floor below the
appliance door. This red signal stays on until the washing programme is completed.
• When the washing programme is completed , a green visual signal shows on the floor
below the appliance door.
• When the appliance has a malfunction, a red visual signal flashes on the floor below
the appliance door.
If the appliance is installed in height, with a flush kitchen furniture door, the visual sig-
nal does not show.
CONTROL PANEL
The controls are on the top on the control panel. To operate with the controls, keep the
appliance door ajar.
1
On/off button
2
Display
3
Delay button
4
Programme buttons
5
Indicators
6
Function buttons
1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on
while a washing programme operates.
On/off button
Press this button to activate or deactivate the appliance.
After ten minutes from the end of the washing programme, the AUTO OFF function auto-
matically deactivates the appliance. This helps to decrease energy consumption.
1
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dis-
1)
penser.
Multitab indicator. It comes on when you activate the function.
2
4
3
C
A
B
D
6
Indicators
5
E
1)