Front Panel - Blackstar Amplification CORE STEREO 10 V2 Manual Del Usuario

By using the unique Voice control and the patented ISF, ID:CORE amplifiers allow
unparalleled flexibility and ease of use, enabling you to design the sound in your
head and deliver it at home, in the studio or in rehearsal.

Front Panel

1. Input
Plug your guitar in here.
Always use a good quality screened guitar lead.
2. Voice
The Voice control changes the preamp voicing, ranging from ultra clean to extremely
overdriven.
 Clean Warm – Classic clean, dynamic
 Clean Bright – 'Boutique', will break up when pushed hard
 Crunch – Classic medium gain overdrive
 Super Crunch – More gain and punch than Crunch
 OD 1 – Hot-rodded Master Volume overdrive
 OD 2 – Mid boosted overdrive
This setting is saved when you store a patch.
3. Gain
The Gain control adjusts the amount of overdrive or distortion. Low settings (counter
clockwise) will deliver a clean sound on the edge of break-up. As the Gain control is
turned clockwise the sound will become more overdriven, moving through beautiful
crunch tones until, at its maximum position, a full distorted tone is achieved. This
setting is saved when you store a patch.
4. Volume
This controls the preamp volume. High levels of volume
will introduce the effect of valve power amp distortion
and compression. This is a global setting and not saved
when storing a patch.
USA UK
5. ISF
The patented ISF control allows you to choose the exact
tonal signature you prefer. Fully counter clockwise has
a more American characteristic with a tight bottom-end
and more aggressive middle, and fully clockwise has a British characteristic which is
more 'woody' and less aggressive. This leads to a very familiar, musical response.
This setting is saved when you store a patch.
6. MOD (Modulation)
Press this switch to turn the stereo modulation effect on, off, or focus the effect for
editing. This setting is saved when you store a patch.
7. DLY (Delay)
Press this switch to turn the stereo delay effect on, off, or focus the effect for editing.
9