Start descaling
The "Start descaling" function allows to start the
machine descaling cycle.
The descaling cycle can be activated at any time,
even if the machine does not require it.
Check there are no pods inside the pod com-
partment.
It is not possible to dispense beverages until the
descaling cycle will be completed.
Follow the instructions below to complete the de-
calcification cycle.
Remove and empty the drop drawer and the ex-
hausted pod drawer
The display will show the following animation.
MACHINE SETUP
Insert the drawers and position a large container
under the spout.
Connect the tube to the drop drawer through the
hole located on the drop collecting grid.
EN
63