Integra MAYFIELD A1109 Manual De Instrucciones página 5

ENGLISH
Description
The MAYFIELD® Horseshoe Conversion Adapters
(REF A-1109, A-1110) were designed to allow for the attachment
of the Horseshoe Headrest (REF A-1011) to attach to MAYFIELD
Swivel adapters (REF A-1018, A-1064, or A-2008) Also, the
Horseshoe Conversion Adapter with knobs (REF A-1110) allows
for the attachment of Horseshoe Headrest (REF A-1012) to
attach directly to the standard 6" transitional member
(REF 41B1171)
WARNING:
Failure to read and follow instructions furnished in this
product insert may result in serious patient injury
WARNING:
Failure to properly position the patient and to fully
secure all adjustment portions of this or any support
device may result in serious patient injury
WARNING:
Do not alter the design of the device in part or whole
as serious patient injury could result
WARNING:
This device is not intended for use in or near the
vicinity of a strong magnetic field (MRI)
Inspection
Always inspect instruments before and after use If a component
appears damaged and/or does not seem to function properly,
do not use the device and immediately send the instrument
to an authorized Integra repair center for evaluation, repair
or replacement Allow your Integra Representative to inspect
this device a minimum of two times per year to assist you in its
proper function
A Horseshoe Conversion Adapter
B Swivel Adapter
C Horseshoe Headrest
A
B
A-1109
A-1018, A-1064,
A-2008
A-1011
C
Figure 1
A Torque Screw
B Horseshoe Conversion Adapter
with Knobs
C Horseshoe Headrest
D 6" Transitional
A
B
Instructions for Use
Horseshoe Conversion Adapter (A-1109)
1 Mount the Horseshoe Conversion Adapter to Swivel
adapter using the torque of the swivel adapter
2 Mount the Horseshoe Headrest (A-1011) to the
Horseshoe Conversion adapter using the torque screw
on the Horseshoe Headrest
Horseshoe Conversion Adapter with Knobs (A-1110)
1 Screw the torque screw on the large sunburst into the
sunburst of the Horseshoe Headrest (A-1012)
2 Screw the torque screw on the small starburst into the 6"
transitional (41B1171)
WARNING:
Before using this product, carefully read the product
insert for correct usage and warnings associated with any
other desired support equipment to be used with this
product prior to its use
CAUTION:
Always be sure the two sets of sunburst teeth mesh
properly, (as shown in Figure 3) Failure to do so may result in
damage to the device
4
A-1110
A-1011
41B1171
C
D
Figure 2
EN – ENGLISH