Settings Menu: Radio Controls - Gsm/Pstn Line Priority - Network Failure - Periodic Message - Sim Expiry- Time/Date; Telephone Exchanges - SILENTRON SILENYA HT 5500 Manual Del Usaurio

4.9.3) RADIO CONTROLS: functions can be activated by calling a control unit via telephone. The control units have 16 possible commands for
locally activating Silentron RX receivers, which can have functions such as switching lights on and controlling operations in a local ambit. To
function controlled by the control unit, these must memorise at last one of the above-mentioned RADIO CONTROLS.
Attention! These functions envision recording the guide message well (4.6.1) in order to make user operations easy.
↑
RADIO OUTPUT
↵ CONFIRM ↓
RADIO OUTPUT 1 ↑
↵ CONFIRM ↓
4.9.4) GSM/TELEPHONE LINE: select the priority mode of calling
↑
GSM – PSTN LINE
↵ CONFIRM ↓
4.9.5) MAINS FAILURE: follow the vocal instructions to have the SMS warning - see also 2.2.2
↑
MAINS FAILURE
↵ CONFIRM ↓
4.9.6) PERIODIC MSG : follow the vocal instructions to have the SMS warning - see also 2.2.2
↑
PERIODIC CALL
↵ CONFIRM ↓
4.9.7) SIM EXPIRY: follow the vocal instructions to have the SMS warning - see also 2.2.2
↑
SIM VALIDITY
↵ CONFIRM ↓
4.9.8) CLOCK/DATE: updating the internal clock and date is important for the historic memory of the events. Internal clock - precision: the
adopted technical solutions may cause a flexibility up to 2 seconds per day, which should be adjusted during the system periodical check, in
compliance with the EN-50131 Regulation.
↑
TIME AND DATE
↵ CONFIRM ↓
4.9.9) TELEPHONE EXCHANGE: setting the access number to the external line in the presence of telephone exchanges (installation not
recommended)
↑
TEL. EXCHANGE
↵ CONFIRM ↓
SILENTRON spa – 10139 – Via Sagra S.Michele 25 Torino - ITALIA
RADIO OUTPUT 1 ↑
↵
↵ CONFIRM
↑
RADIO OUTPUT 2
↓ ↵ CONFIRM
↑
PSTN LINE AND
↵
↓
GSM BACK-UP
MAINS FAILURE N
↵
↵ T: 30 min.
N ↑
PERIODIC CALL
↵
↵ CONFIRM
SIM VALIDITY
↵
↵ T: 11 MONTHS ↓
SET TIME
↵
19.25
N ↑
TEL. EXCHANGE
↵
V: _ (0 . . .9)
RADIO OUTPUT
↵
↓ ↵ IMPULSIVE
Proceed in the same mode for all controls you need.
↑
↵
When established the "domotic" function please record
↓
the message 7 (see MESSAGES: VOCAL RECORDING)
to help the user when the unit will be called
↑
GSM AND PSTN
↓
LINE BACK-UP
Choose Y (yes) or N (no)
↑ ↑
to set the function and write
↓ ↓ timing of failure you need
Message (1 to 99 minutes)
Choose Y (yes) or N (no)
↑
to set the function and write
↓ ↓ timing you need calling
(1 to 99 H) and start time
Choose Y (yes) or N (no)
↑ ↑
to set the function and write
↓ the expiry date of the SIM
SET DATE
↵
DD / MM / YY
Choose Y (yes) or N (no) to set
↑
the function and write the right
↓ ↓
number. Warning: it's better to
connect directly the unit on net
COPYRIGHT SILENTRON DS5500/1/2/3XC100120GM
Confirm the IMPULSIVE radio-
control or change in ON-OFF if
↑
preferred by pressing ↑↓. Set the
↓
receiver to store the control and
press ↵: receiver is programmed
↑
↵
Choose other settings
↓
MAINS FAILURE
↵ T:
05 MINUTES
PERIODIC CALL
↵ T:
24 H 10.00
SIM VALIDITY
↵ T:
10 MONTHS
↵
TEL. EXCHANGE
V: 9 (0 . . .9)
E
S
C
↑
↓
↑
Y
↵
↓
↑
Y
↵
↓
↑
↵
↓
↑
↓
↑
Y
↵
↓
34