How To Install Your Canopy Housing - Fanimation The Multimax FP8008CH1 Manual Del Usaurio

How to Install Your Canopy Housing

1. Remove one of the two shoulder screws in the
hanger bracket. Loosen the second shoulder screw
without fully removing it. Assemble canopy by
rotating key slot in canopy over shoulder screw in
hanger bracket. Tighten shoulder screw. Fully
assemble and tighten second shoulder screw that
was previously removed (Figure 1).
WARNING
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and
the ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the key slot twist-lock feature. (Figure 2)
Shoulder
Screws (2)
10
Canopy
Figure 1
Canopy Screw
Cover
Figure 2